Air-fuel Ratio Modifier

Air-fuel ratio correction liquid, adopting super dispersion technology, has good adhesion, adsorbed on the carbon deposit surface,with fission and dissolution, thoroughly removing the carbon deposit on the top of the piston, with excellent permeability, so that the product solution quickly reaches the piston ring and slot, dissolving the carbon deposit in the piston ring that is difficult to remove, releasing the piston ring elasticity, reducing the combustion chamber cylinder pressure, and restoring the normal air-fuel ratio to slow burning oil. The PH neutral oil formula protects the top of the piston and the cylinder wall, while preventing the cylinder from straining.

Scope of Application

* Preheat the engine and bring it to normal operating temperature;

* Remove the spark plug successively and inject the product into the cylinder through the spark plug hole;

* Take the spark plug, soak for 30 minutes, remove the spark plug, and use the equipment to suck out the residual liquid;

* Dry the residual liquid of the combustion chamber with the air gun, and check the carbon accumulation in the cylinder with endoscopy. If there is carbon accumulation, repeat steps 2,3,4;

* Add a little oil to the cylinder, turn the crankshaft, remove the excess liquid, and blow away; Start the engine motor for a few seconds; Install spark plug, and restore all parts;

* Start the engine to idle for one minute, and then run 2000-3000, so that the softened carbon deposits are discharged to the bottom until the exhaust fumes are exhausted (about 2-3 minutes).

Packing size: 200ml